Please use this identifier to cite or link to this item: http://archive.cmb.ac.lk:8080/xmlui/handle/70130/6288
Full metadata record
DC FieldValueLanguage
dc.contributor.authorEkanayake, E.M.A.C.-
dc.contributor.authorAmaratunga, K.S.P.-
dc.contributor.authorKariyawasam, H.K.P.P.-
dc.contributor.authorFernando, A. J.-
dc.contributor.authorAbeyrathna, R. M. R. D.-
dc.date.accessioned2021-11-28T02:39:12Z-
dc.date.available2021-11-28T02:39:12Z-
dc.date.issued2019-
dc.identifier.citationEkanayake, E.M.A.C., Amaratunge, K.S.P., Kariyawasam, H.K.P.P, Fernando, A. J. & Abeyrathna, R. M. R. D (2019) Design and Development of a Closed Cycle Heat Pump Drying System for Industrial Drying of Rice and Chili, Journal of Scientific and Engineering Research, 6(12),1-7. http://jsaer.com/download/vol-6-iss-12-2019/JSAER2019-6-12-1-7.pdfen_US
dc.identifier.urihttp://archive.cmb.ac.lk:8080/xmlui/handle/70130/6288-
dc.description.abstractA closed cycle heat pump drying system was developed to study the thin layer and deep bed heat pump drying characteristics of rice and chiliin industrial scale. Two units of dehumidifiers assembled with heat pumps with a capacity of 0.95 kW were placed in a modified air-tight room (10 m x 3 m x 3 m) for dehumidifying air. The commodities to dry were tested inside this dehumidified room for the drying rate variations and the efficiency of the system. A microprocessor-based primary control system was used to vary the duty cycle of dehumidifiers and thereby control the operational behavior of the dehumidifiers. The secondary control system was used in controlling the relative humidity in the dehumidified room by using RH sensor and a microprocessor-based control system. The variation of moisture content of rice and chili was observed in thin layer and deep bed drying in the dehumidified room. After 65 minutes of operation, the relative humidity and temperature of the empty store room reached 16% and30⁰C simultaneously. The calculated MER value for heat pump drying system was 1.2 kg-water/h. The SMER for rice and chili was 0.7 kg-water/kWh and 1.4 kg water/kWh respectively. The optimum final moisture content of rice and chili could be achieved by rice and chili. Thin layer heat pump drying rates were higher than the deep bed heat pump drying of rice due to the higher air circulation through thin layers of rice. Chili had similar thin layer and deep bed heat pump drying rates because of the low density and high porosity of chili layers. In conclusion, thin layer and deep bed heat pump drying technology could be applied to achieve the optimum moisture content for rice and chili respectively in industrial scale. Further studies are required to optimize the performance of the heat pump drying systemen_US
dc.language.isoenen_US
dc.subjectchilien_US
dc.subjectdryingen_US
dc.subjectheat pumpen_US
dc.subjectriceen_US
dc.titleDesign and Development of a Closed Cycle Heat Pump Drying System for Industrial Drying of Rice and Chilien_US
dc.typeArticleen_US
Appears in Collections:Department of Agricultural Technology

Files in This Item:
File Description SizeFormat 
HKPPK 2019.pdf491.02 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.